Manual of Instructions For Wurlitzer Simplex Coin-Controlled Automatic Phonograph (USM01)

Manual of Instructions For Wurlitzer Simplex Coin-Controlled Automatic Phonograph (USM01)
  • Click to enlarge

£20.00

 

Product Information
Specification
  • Manual of Instructions For Wurlitzer Simplex Coin-Controlled Automatic Phonograph
  • 2nd Hand Used Manual

Contents of Manual

  • Part One – 312 & 412 Service Instructions
  • Part Two – Model 35 Service Instructions
  • Instructions for setting up new instrument
  • Tone arm adjustments
  • Adjustment of trip & out-off mechanisms at end of record
  • Coin mechanism
  • Manual trip
  • Record tray stop bar
  • Selector dial and program holder
  • Motor mounting
  • Chassis mounting
  • Tone arm and pick-up head assembly
  • Dome lights and junction box
  • Motor protector
  • Turn table assembly
  • Oiling arrangement
  • Instrument apparently operating OK but no music
  • Coin is inserted instrument does not start
  • If needle misses the record
  • Needle does not feed into the music grooves properly
  • Tone arm does not return to lock position (record finished playing)
  • Trip mechanism does not operate at end of play
  • Instrument continues to change records without playing
  • Turn table comes up part way and immediately drops down
  • Instrument does not select properly
  • Instrument fails to take record carrier back from turn table
  • Record trays do not return all the way into the stack
  • Cannot repeat same record
  • Tone is poor
  • Mechanism is noisy
  • If instrument does not give a play for every coin deposited
  • Record does not turn when needle contacts it
  • How to remove main Bakelite gear
  • Instructions for installing auxiliary speaker
  • Instructions for installing wall boxes
  • If instrument plays continuously
  • Instructions and equipment required for installing microphone
  • Instructions & parts required to change 32 volt DC & 110 volts DC instruments back to 110 volt 60 cycle
  • Instructions & parts to change 110 volts 60 cycle instruments over  for use on 32 volt DC & 110 volt DC using amplifier converter and DC motor
  • Instructions & parts required to change 110 volt 60 cycle instrument to 32 volt DC & 110 volt DC using large convertor
  • Various drawings included Wiring diagrams / Schematics
  • Part Two – Wiring schematic of 680 amplifier
  • Part Three – Tone Manual
  • Installation
  • Records
  • Needles
  • Tone Control
  • Pick Up
  • Microphonics
  • Tone troubles
Product CodeUSM01
Stock Level1
ConditionUsed
Weight0.7kg

Customer Reviews

This product hasn't been reviewed yet.

Write a review

Write Review

Please enter a valid email address.
This field is required.
Top